Pic23D Open converter

PNG to 3D model converter

Turn a transparent PNG, logo or line drawing into a raised plaque with a flat base — a real printable solid, not a picture. Everything happens in your browser.

Download the file

No image loaded yet. Your picture is read by this browser tab and never sent to a server.

Pick an image to start. Nothing is uploaded.

Your image is read by this browser tab only. Nothing is uploaded, nothing is stored, and no account is required.

From flat artwork to a solid you can hold

A PNG of a logo, a mascot or a line drawing already contains everything a printer needs — you just have to give it a third dimension. In Plaque mode the converter looks at transparency and brightness: opaque pixels become a raised shape, the transparent parts stay as a flat 0.4 mm base. The result is a solid part with one flat back, ready to glue, screw or print straight onto a keyring.

What makes a good source PNG

  • Transparent background. The cleanest outlines come from a PNG with real transparency. If you only have a JPG, remove the white background in any editor first — otherwise the whole rectangle becomes the plaque.
  • At least 400 px on the long side. Smaller logos lose thin strokes once the mesh is sampled.
  • Solid shapes, not hairlines. A 1 px line in a 400 px logo is a quarter of a millimetre at 100 mm wide, which is too thin to print.
  • One colour. Detail comes from the shape, not from the shading. Multi-colour logos print as one silhouette unless you split them into layers yourself.

Settings for plaques and keychains

Width is the finished width in millimetres. A keyring is 40–50 mm, a desk sign 80–120 mm, a cookie cutter outline 70–90 mm. Depth controls how far the shape stands proud of the base; 1.5–2.5 mm is enough for a logo that will be painted, and 3–5 mm makes a chunky hand-feel badge.

Detail needs to be high for lettering: 220–300 px for anything with text. Build time grows quickly, so raise it only when the preview looks soft.

Print settings

Print flat on the base with the raised side up. 0.2 mm layers, 3 perimeters, 15% infill is plenty for a plaque that sits on a desk; go to 100% infill if the part is under 60 mm and gets handled. A 5 mm brim stops thin cut-outs from peeling. If your logo has islands of detail smaller than the nozzle, they will be dropped by the slicer — check the preview after slicing, not before.

Turning it into a keychain or a sign

Add the hole in your slicer rather than in the converter: place a 3 mm cylinder as a negative volume near one edge. A 0.4 mm base with 2 mm of relief survives being carried in a pocket; a 0.4 mm base with 0.4 mm of relief does not.

Honest limits

This is a relief of the artwork, not a modelling tool. Curves are quantised to the detail grid, so a circular logo gets a very slightly faceted edge — invisible at 300 px and below 60 mm wide, visible on a close-up photo of a large sign. If you need perfect arcs, bring the STL into Blender and rebuild the outline with a curve, or cut the shape from the mesh and re-extrude it.

For photographs use photo to STL. For grayscale depth maps and OBJ export use image to OBJ.

Questions

Which mode should I use for a logo?

Plaque mode. A PNG with a transparent background becomes a raised cut-out on a flat 0.4 mm base, which is the shape you want for signs, badges and cookie cutters.

My PNG has a white background, not transparency. What happens?

Remove it first. In Plaque mode opaque pixels are raised, so a white JPG background becomes part of the plaque. Any background remover will do — the result just needs real transparency.

Will thin lettering survive?

The slicer will drop any feature narrower than your nozzle, so keep strokes above 0.6 mm at the final size. Raising the detail slider keeps the shape faithful but cannot make a hairline printable.

Can I add a hole for a keyring?

Yes, in your slicer. Add a 3 mm cylinder as a negative volume at the edge — that way the hole lands exactly where you want it on the final size.

What if I need an OBJ of a PNG?

The same mesh in OBJ instead of STL, for software that prefers OBJ. Open [image to OBJ](/image-to-obj) and switch the format dropdown.