Pic23D Open converter

What Is a Lithophane? The Photo That Only Appears in Light

Published 2026-11-18

A photograph made of thickness

A lithophane is a flat plate of plastic whose thickness varies with the brightness of an image. In daylight it looks like a blank white tile. Hold it up to a lamp and a photograph appears, because thin areas let more light through than thick ones.

The effect is old — porcelain lithophanes were being made in France and Germany in the 1820s — and 3D printing brought it back because it is the one photographic effect a single-colour printer can produce perfectly.

Why it works so well on a hobby printer

A photograph printed flat in plastic looks like a sticker. A photograph encoded in thickness looks like a photograph, because the human eye reads light intensity in the same way whether it comes from ink, from a screen or from a backlit sheet.

And the geometry is trivial: one height per pixel, capped into a solid. No supports, no overhangs, no assembly. The whole model is a rectangle with a bumpy back.

The three numbers that decide the result

Depth — the distance between the thinnest and thickest point. Under 2 mm the image is faint; over 4 mm it gets heavy and the brightest highlights start to block light. 3 mm is the working default.

Width — the printed width. Under 60 mm faces stop reading; 100 mm is the sweet spot; 150 mm is a framed portrait.

Detail — how many sample points across the image. Low detail gives visible facets along the gradient; high detail gives a clean image and a much heavier file.

Printing one

Upright, 100% infill, 0.12 mm layers, white or natural PLA, 3 perimeters, brim on, no supports. The print is thin and tall, so bed adhesion and a slow first layer matter more than speed.

One warning that catches everyone: a lithophane photographed under normal room light looks like an empty white rectangle. Judge it backlit, always.

Lithophane or flat colour print?

If you have a multi-colour printer you can print a photo in colour and it will look like a photo in daylight. A lithophane trades colour for depth: it is cheaper, it works on any printer, and it does something a flat print cannot do — it changes as the light changes, which is why people keep them on windowsills.

Making one now

The photo to STL converter builds the mesh in your browser in about a second: load the picture, keep the depth at 3 mm, choose a width, download the STL. If you want the print settings spelled out, how to 3D print a photo has the full recipe with a settings table.

For logos and line art the same engine works in plaque mode — that is PNG to 3D model.