Pic23D Open converter

Height map to STL

Turn a grayscale height map into a printable relief: white becomes the high points, black stays at the floor. The converter below opens in Relief mode and runs in your browser — nothing is uploaded.

Download the file

No image loaded yet. Your picture is read by this browser tab and never sent to a server.

Pick an image to start. Nothing is uploaded.

Your image is read by this browser tab only. Nothing is uploaded, nothing is stored, and no account is required.

How a height map becomes a solid

Every pixel's brightness becomes a height. In Relief mode the converter reads brightness on a scale from black to white and builds a surface that is 0.4 mm thick where the map is black, rising to 0.4 mm plus the depth slider where the map is white — 3.4 mm at the default 3 mm setting. It then adds a flat back and four side walls, so the STL is one closed solid that a slicer can slice without repair.

Brightness is measured as luminance, so a colour image still converts — green counts for most of the brightness, blue for the least. A true grayscale map is the only way to get exactly the heights you drew.

Getting the scale right

  • Width. The Printed width slider (20–200 mm) sets the size across; the other side follows the image's aspect ratio.
  • Height. The depth slider (1–5 mm) is the full range from black to white. The map carries no units, so work out the vertical scale yourself: a 10 km wide terrain tile printed 100 mm wide is 1:100,000, and at that scale 500 m of relief is 5 mm.
  • Detail. The Detail slider sets how many samples are taken across the image (60–300). At 100 mm wide and 140 samples, the points are about 0.72 mm apart. More samples keep sharper edges but make a heavier file.

Preparing the map

  • Check the direction. Relief mode wants high = white. If your source paints the high ground dark, tick Invert light and dark.
  • Flatten transparency. Relief mode ignores the alpha channel. If you want empty areas to sit at the floor, put the map on a black background before you load it.
  • Give it a floor. Black areas are only 0.4 mm thick, which is flimsy on a large tile. Raising the darkest value in an image editor lifts the whole floor: setting black to 40 out of 255 adds about 0.47 mm at the default 3 mm depth.
  • Crop first. The converter uses the whole image, so crop to the area you want printed.

What height maps suit

  • Terrain tiles and relief maps from elevation data exported as a grayscale image.
  • Displacement and bump textures turned into coasters, tiles and texture samples.
  • Depth maps from depth-estimation software, for a shallow 2.5D relief of a scene.

The relief stays shallow — 5.4 mm at most — so this suits plaques, tiles and wall pieces rather than tall mountain models. A normal photo in Relief mode comes out as a bumpy plaque, not a picture; for photos use photo to STL, which builds a lithophane instead.

Printing it

Print face up with the flat back on the bed. A height-map surface has no overhangs, so it needs no supports. Because the relief is shallow, a finer layer height makes gentle slopes noticeably smoother.

Need the same relief in Blender, CAD or CNC software? Image to OBJ exports it as OBJ. For logos and cut-outs, use PNG to STL.

Questions

Does white mean high?

Yes. In Relief mode the brightest pixels become the highest points and pure black sits at the 0.4 mm floor. If your map uses dark for high, tick Invert light and dark before you build.

Can I use a 16-bit height map?

Yes, but the browser reads it at 8 bits per channel, so it becomes 256 height levels. At the default 3 mm depth that is a step of about 0.012 mm, which is finer than any layer height a slicer will print.

Why does my print look almost flat?

The whole map is squeezed into the depth slider, which tops out at 5 mm. A low-contrast map uses only part of that range — stretch the levels in an image editor so the lowest point is black and the highest is white, then build again.

How big can the file get?

The tab stops at 120,000 triangles, which for a square map is about 240 samples across. A square map at the default 140 samples gives about 39,000 triangles and a binary STL of roughly 1.9 MB.

Is my height map uploaded anywhere?

No. The image is read by this browser tab, the mesh is built there, and the download is created locally. Nothing is sent to a server and no account is needed.